Online Mall
OCZL-ZL handing forklift
2016-06-02
Product brief introduction
The handing forklift is special for transit of particles, the pressure block factory raw material , special in the trees, branches, bark, wood, grass, wheat straw, corn straw, garbage, sludge garbage, old tires and other raw materials loading, transport, piled high and preparation work, We can customize the enlarged hopper to save time,oil and labor.
product parameter
Timber grab | OCZZ-ZL910 | OCZZ-ZL920 | OCZM-ZL926 | OCZZ-ZL930 |
Rated load weight(kg) | 1000 | 1600 | 2000 | 3000 |
Weight(kg) | 2300 | 3200 | 4300 | 5200 |
Engine model | 28 | 490 | 4100 | 4102 |
Rated power(kw) | 22 | 37 | 44 | 62 |
Rated revolving speed(r/min) | 2200 | 2200 | 2200 | 2200 |
Discharge height(mm) | 3000 | 3200 | 3200 | 3200 |
Discharge distance(mm) | 1000 | 1000 | 1000 | 900 |
Discharge time(s) | 3.5 | 3.5 | 3.5 | 3.5 |
Tyre size | 1000-16 | 20.5-16 | 16/70-20 | 16/70-20 |
Steering mode | Full hydraulic | Full hydraulic | Full hydraulic | Full hydraulic |
Drive mode | Four-wheel drive | Four-wheel drive | Wheel side hydraulic drive | Wheel side hydraulic drive |
Drive axle | 50 bell axle | 50 bell axle | 50 bell axle | Drive axle |
Brake manner | Oil brake | Oil brake | Four disc brake of gas cap oil | Four disc brake of gas cap oil |
Boundary dimension(mm) | 4690*1600*2560 | 5000*1900*2700 | 5200*1900*2800 | 5400*1940*2800 |
Service
1.The warranty period is calculated from the date of delivery of the product to the customer.
The warranty period:
one year for frame;
engine according to the matching engine plant(E-IT);
six mouths for the welded front frame parts,the welded rear frame parts,the welded movable arm parts,the welded bucket parts.
2.Warranty coverage
（1）Failure or damage caused by product design
（2）Due to the use of products in the manufacturing process of raw materials, auxiliary materials, components, parts and lead to failure or damage.Failure or damage caused by process.
（3）Failure or damage caused by product manufacturing, processing, assembly.
（4）The following parts and components due to the provisions of the national industry standard or the domestic level of restrictions,according to the following provisions:
According to the provisions of the national electrical industry, door locks, battery, speaker, generator, starter, all kinds of instruments etc. electrical components warranty for three months;
The warranty period is 15 days for the wiring harness (frame harness, cab harness);
The warranty period of the high pressure rubber tube is three mouths.
3.Normal wear and tear and wear is no warranty.
4.Technical maintenance
Customers should do routine maintenance and regular maintenance according to the specification.
（1）Cleaning or replacing filters of all kinds of oil,gas etc.
（2）Adjusting the generator, the brake device and other parts to be adjusted.
（3）Fastening of all kinds parts,bolts.
5.Notes of new car
（1）It is strictly prohibited to use non labeled fuel oil, gear oil, hydraulic oil.It’s necessary to replace hydraulic oil ,gear oil when new car works up to 80-120 hours.
（2） Detail of wear parts:all oil seals, bearings, seals, all kinds of rubber sheath, triangular belt, friction plate.
(Quality warranty processing details refer to the quality warranty manual)
